July 2021
Link

Inspection Management INSP running in Taiwan

We are pleased to announce that iCADA's reticle inspection management software INSP is in production at Nanya, our long-term customer in Taiwan. INSP is a logical consequence of our continuous improvements in the field of reticle management. In subsequent projects with Nanya we will focus on improving and automating their reticle and reticle inspection workflows even further.

April 2021
Link

First installation of RTCL and INSP at a customer in China went into production

We are pleased to announce that iCADA's reticle inspection management software INSP is now in production at our first customer in Mainland China.  ☺  Together with our Chinese partners we were able to complete the installation in a very short time, despite COVID-19 travel restrictions. We are looking forward to a very good collaboration in the field of reticle management.
January 2020
Link

Photomask Japan 2020



Annex Hall, PACIFICO Yokohama
19. – 21. April 2020
Pacific Convention Plaza Yokohama
1-1-1, Minato Mirai, Nishi-ku
Yokohama 220-0012, JAPAN

Because of COVID-19 the conference was cancelled. We regret this, but find it a right step to protect health.

Visit us at the Photomask Japan 2020

The aim of the Photomask Japan is to bring together engineers and investigators from all over the world in the field of photomasks, NGL masks, and related technologies. The Photomask Japan 2020 is the 27th international symposium on photomasks and NGL masks in Japan.

We present our Reticle Management Software (RTCL) which covers the entire reticle and carrier life cycle including mask ordering, CofC validation, incoming qualification, reticle stocker automation, reticle inspection, tracking of movements, status changes, waivers, requalification, repellicalization, repair, etc.

Our Mask Vendor Connectivity (MaVen) provides for monitoring of the entire reticle order process, automatic status and ETA updates from the mask house, automatic read-in and plausibility/validation checks of data prep information, reticle order files (e. g. SEMI P10) and certificate of conformance (CofC) files. Automatic emails to configurable groups of engineers can be sent, based on the validation result or other business rules. Corrective actions can be taken, before the reticle is manufactured or shipped, resulting in tremendous savings in both cost and time.

iCADA's advanced Inspection Management Software (INSP) provides functions for triggering and monitoring of reticle inspections, based on a flexible counter and timer mechanism. Dynamic cycles per reticle or reticle group can be configured, e. g. to reflect changes inspection the cycles after reticle cleaning/repair for crystal growth and haze. Automatic inspection result analysis after import from KLA Starlight/TeraScan, ASML IRIS, Canon PPC, Nikon PPD, Dr. Schenk Pollux, etc. minimizes human errors and ensures that your business rules are strictly met. Moreover, inspections can be easily visualized and further evaluated in our convenient user interface (RIMGui).

Our software provides an open interface to integrate seamlessly with any MES and MCS system, as well as photo dispatch and scheduler applications. It is in production since 1999 in many advanced fabs around the world.

https://www.photomask-japan.org/
October 2019
Link

SEMICON Japan 2019

Tokyo International Exhibition Center
11. - 13. December 2019
Tokyo Big Sight
3-11-1 Ariake, Koto-ku
Tokyo, Japan 135-0063


Visit us at the German Pavilion at booth #2420

We present our Reticle Management Software (RTCL) which covers the entire reticle and carrier life cycle including mask ordering, CofC validation, incoming qualification, reticle stocker automation, reticle inspection, tracking of movements, status changes, waiver, requal, repell, repair, etc.

Our Mask Vendor Connectivity (MaVen) provides for monitoring of the entire reticle order process, automatic status and ETA updates from the mask house, automatic read-in and plausibility/validation checks of data prep information, reticle order files (e. g. SEMI P10) and CofC files. Automatic emails to configurable groups of engineers can be sent, based on the validation result or other business rules. Corrective actions can be taken, before the reticle is manufactured or shipped, resulting in tremendous savings in both cost and time.

iCADA's Advanced Inspection Management Software (INSP) provides all needed functions for triggering and monitoring of reticle inspections, based on a very flexible counter and timer mechanism. Dynamic cycles per reticle or reticle group can be configured, e. g. to reflect the decreasing inspection cycles after reticle cleaning/repair, when counting the exposure dose to monitor crystal growth and haze. Automatic inspection download and analysis of all reticle inspection results (KLA Starlight/TeraScan, ASML IRIS, CANON PPC, NIKON PPD, Dr. Schenk Pollux, etc.) minimize human errors and insure that your business rules are strictly met. Moreover, inspections can be easily visualized and further evaluated in our advanced Reticle Inspection Management GUI (RIMGui).

The latest developments are our Probe Card Management Software (PCRD) and our generic Durable Management Software (DRBL) which cover the life cycle of durables in testing areas like for probe cards, probe card boards, probe heads and sockets. Furthermore, other generic durable types like saw blades can get managed by the iCADA systems.

Our software provides an open interface to integrate seamlessly with any MES and MCS system, as well as photo dispatch and scheduler applications. It is in production since 1999 in many advanced fabs around the world.

https://semicon-japan.german-pavilion.com/en/exhibitors/83027/
July 2019
Link

20th anniversary of iCADA

For the last 20 years, iCADA have been supporting customers all over the world in managing their fab assets.  We started with a simple reticle stocker integration and this reticle storage manager (RSM) is still one of the core components of our current RTCL and DRBL life cycle management systems.  Through continuous product development we also created new components such as our reticle inspection management system (INSP) and our probe card system (PCRD), which is used in wafer test.

All iCADA fellows want to thank our customers and friends for the very good cooperation, and for the challenging projects you gave us.  Your high expectations helped us to get where we are, and drive our future developments.  Thank you!  :)
January 2019
Link

iCADA expands its team into Korea

We are pleased to announce that YH Trade in Yongin has been appointed as our sales representative to grow iCADA's business in Korea.

Vincent Tsou from iCADA will support YH Trade in order to provide our Korean customers with competent consultancy on our products: RTCL, INSP, PCRD, DRBL and NPW.
November 2018
Link

iCADA goes live with DRBL for die test sockets

We are pleased to announce that iCADA's durables management software DRBL is now in production, managing sockets in the wafer test area of a major customer in Austria.  “The integration project went very smoothly and strait forward” said Tobias Ferber, CTO at iCADA.  “This is another milestone supporting our customers with our generic durables management system.”
November 2018
Link

iCADA expands into China

We are pleased to announce that Unitek Company Limited in Shanghai has been appointed as our sales representative to grow iCADA's business in China.

Vincent Tsou will support Unitek in order to provide our Chinese customers with competent consultancy on our products: RTCL, INSP, PCRD, DRBL and NPW.

Older »

Source: icada.blogspot.com